Q. Can't I sell just 3.0mm or 3.5mm HATCH REAMER?
(I only need one..)
A. Yes! Only 3.0mm HATCH REAMER can remove the maxillary sinus bone and raise it.
The purpose of the HATCH REAMER is to form holes of the desired diameter in the maxillary sinus bone without damaging the membrane.
Even if the remaining bone is small enough to require window opening, the goal is to obtain initial fixation and to implant as much as needed, from the periphery of the implant placed up to 3-4 mm upward.
In addition, the patient is comfortable and the operator must be able to perform a safe operation easily and quickly.
Estimates of surgical outcomes should also be possible.
The function of the HATCH REAMER is not only to remove the dense bone without breaking through the membrane, but also has another important function that allows the membrane to be lifted around the implant, safely and quickly, while rotating the implant. To achieve elevation and bone graft goals from around the implant up to 3-4 mm upwards ...
The bone condenser in the kit is the instrument that helps the HATCH REAMER to function for this result.
1/4 of the bone is discharged backwards to prevent dangerous pressure on the membrane and about 3/4 of the bone is rotated into the maxillary sinus, filling the bone so that it can naturally become a colossus and a graft.
It is difficult to sell individual hatch reamers for the ideal, easy and fast maxillary sinus implant operation using HATCH REAMER. Of course, refilling reamers is possible.
