Thank you for your first use.
Let me start with the conclusion.
It is possible and still many surgical methods are used by the Saints.
In the first manual, after using twist-drill 1mm before the remaining maxillary sinus, 2.5mm, 3.0, 3.5… I explained how to open the HATCH with a hatch reamer that can be fixed initially after expanding the diameter gradually with a hatch reamer.
Most maxillary sinus implant surgery is less than 10mm.
Hatch Reamer upgraded three times in five years since its initial release, and the efficiency of deletion has increased.
Careful high speed twist-drill removal and low speed but comfortable hatch reamer removal
There is no big difference in time.
Therefore, I believe that the removal efficiency of Hatch Reamer Express is much improved and I recommend to use diameter Hatch Reamer that can be fixed at the beginning after Dia-Reamer indentation.
Now that you know how you feel about using hatch reamers, you can operate in a convenient way.
If you have any, please refer to the clinical case.
Low speed reaming has several advantages.
1) The patient is comfortable because no saline is used.
2) You can get a fresh autologous bone, which reduces the additional bone requirement.
3) Good visibility due to no saline solution and low speed for easy observation and control of the elimination process
Safe surgery is possible.
Thank you.
------- 원본 내용 ---------
Today, for the first time, I used 50rpm without doubling on 6mm residual bone.
But it seems that the elimination power is a little lower .. Surgery was successful.
Do you use a twist drill up to 5mm on the remaining bone and use a hatch reamer in the remaining 1mm to lift the membrane?
